Description

SMART SENSOR AT380 infrared thermometer is safely and quickly used for measuring the temperature of the object’s surface without contact. The most basic design consists of a lens to focus the infrared (IR) energy on to a detector, which converts the energy to an electrical signal that can be displayed in units of temperature after being compensated for ambient temperature variation.

Product Features

1.Temperature range: -32 ̊C~380 ̊C/-26 ̊F~716 ̊F
2. Non-contact rapid temperature measurement: It is very convenient and safe
3. Backlight function: It can clear observation in dark places
4. Automatic shutdown function: It is economical and power saving
5. Widely using range: It can use in water temperature, oil temperature, baking, heating, refrigeration, etc.

Temperature range

AT380:-32 °C to 380 °C (-26 to 716 °F )

AT380+:-50C~380C(-58F~716F)

Accuracy(In the condition of 23°C±3°C) -32°C (-26°F) to 0°C (32°F)
±3°C 0°C(32°F) to 100°C (212°F)
±2°C 100°C here in before
±2°C or ±2% whichever is greater
Repeatability 1% of reading or 0.1°C
Response time 500 mSec, 95% response
Spectral response 8-14 um
Emissivity pre-set 0.95
Ambient operating range 0 to 40°C (32 °Fto 104°F)
Relative humidity 10-95% RH noncondensing,@up to 30°C (86°F)
Storage temperature -20 to 60°C (-4°Fto 140°F)
Weight 130g without battery
Dimensions 132.8*92.8*37mm
Distance to Spot Size 12:1
Power Supply 2 x AAA battery (not inlcude)
Package Contents 1pc AT380 Therometer
1pc user’s manual English
1p blister package
Quick Start Instruction:
Step 1 Press battery door clip, install battery correctly. Pull the trigger, LCD display reading& battery icon. Release the trigger and the reading will hold for 7 seconds.
Step 2 Locating a hot spot: To find a hot spot aim the thermometer outside the area of interest, then scan across with up and down motions until you locate the hot spot. (please turn on the laser for accurate measuring)
User’s Guide:
Instructions Compact, rugged and easy to use. Just aim and push the button, read the current surface temperature in less than a second. Safely measure the surface temperature of hot, hazardous or hard-to-reach objects without contact.
How it works temperature of an object, The optical detector senses the object s emitted energy with different wavelength. It is collected and focus onto a detector. The electronics system translated the information into a temperature reading which is displayed on the unit.
Cautions Infrared thermometer should be protected from the following:
–EMF (electromagnetic fields) from welding equipment, inductive heaters.
–Thermal shock (cause by large or abrupt ambient temperature changes allow 30 minutes for the unit to stabilize before use).
— do not leave the unit on or near objects of high temperature.